Coby CS-MP125 User Manual - Page 20

AUX Mode Play any external audio device with a 3.5mm headphone out or line-out jack through the speakers of your CS-MP125 (e.g., MP3, CD player, etc.). Basic Operation 1. Use the Line-In cable to connect an external auxiliary audio device to your CS-MP125's Auxiliary Audio Line-In jack. 2. Turn the player on. To enter AUX mode, press pears on the LCD Display. until "AUX" ap- 3. Use the controls on your external device to start playback.  You must use the external audio device to control playback.  To avoid distortion, do not set the volume from the external audio device to very high levels. For optimal volume control and audio fidelity, set the volume level on the external device to approximately 80%, and then turn the Volume dial of the CS-MP125 to adjust the volume to the desired level. Page 20 Coby Electronics Corporation