Coby KCD150 User Manual - Page 14

English Clock Mode Setting the Clock Time Make sure the unit has been turned off before setting the time. To toggle the clock display between 12-hour mode and 24-hour mode:  Press and hold STOP/CLOCK ADJ [18] for 3 seconds. The screen will display "12H" for 12-hour mode, or "24H" for 24-hour mode.  To change modes again, wait until the normal clock display returns, then press and hold STOP/CLOCK ADJ [18] again. The PM indicator will light up in 12-hour mode to indicate PM hours. To set the clock time:  Press STOP/CLOCK ADJ [18] once. The screen will begin to flash.  While the screen is flashing: —— Press SKIP UP/HOUR [9] to adjust the hour. —— Press SKIP DOWN/MINUTE [10] to adjust the minutes.  Press STOP/CLOCK ADJ [18] to finish setting the time. Page 14 Coby Electronics Corporation