Coby TFDVD3295 User Manual - Page 13

Cable Connections Coaxial Output - Digital Audio Output Connector When MPEG audio or Dolby Digital audio is played, Dolby Digital bitstream or MPEG audio bitstream is sent to the player's digital audio output connector. When the player is connected to a Dolby or MPEG audio decorder via this output socket, you can enjoy theater-quality audio in your home. A coaxial audio cable is required when a Dolby Digital decoder or MPEG audio decoder is used. The mentioned cable is not included with this product. Amplifier equipped with a DolbyPro Logic Surround A C΋100V-240V 50Hz/60Hz Coaxial cable (not supplied) External Audio and Video Signal Input - HDMI, RCA, S-VIDEO, COMPONENT. The player's AV function would enable users to view programs from external signal sources. Four input modes are available for you to chose from, it ranks as below in regard to image definition: HDMI/ COMPONENT/S-VIDEO/RCA NOTE: We supply one set of AV cable and one piece of power cord with this product. The white/red plug of the AV cable is for the audio L/R connection and the yellow plug for the video connection. The white/red plug of the AV cable can alsAPomropLbliofiegeirceuSqusuriepropduenddwith a Dolby separately to input the audio signal in the S-video/Component connection. The rest of cable needed for other neccessary connections are not included with this product, please check with electronic store. IMPORTANT NOTICE - When work with external device, •• Be sure to have all necessary connections properly done before connect the power supply. •• Set the unit into the relative input/output mode to enable the signal pass. •• Refer to the manual of external sources as well. 8