Coby TFDVD560 Instruction Manual - Page 15

BASIC OPERATIONS Basic Disc Playback 1. Open the player. Slide the latch in the direction of the arrow to unlock the DVD player and unfold to open. 2. Prepare the power supply. Set the Power Switch to the ON position to turn the player on. 3. Load a disc. Press the Open button to open the disc compartment lid. Insert a disc with the label-side up. Close the lid by hand (the lid will click into place). • If a single-sided disc is inserted upside-down, the player will display "NO DISC" or "BAD DISC". 3. Start playback. Make sure the AV Switch is set to AV OUT to use the player's built-in LCD screen. Press PLAY to start playback (some discs may start playing automatically). Play/Pause/Stop • Press to play the disc for the first time. • Press during playback to pause. Press again to resume playback. • Press during playback to stop the disc ("Pre-Stop"). Press to resume playback at the time-point at which the disc was stopped. • Press when the disc is "Pre-Stopped" to stop playback completely. (When is pressed, the disc will start playing from the beginning.) Previous/Next (Skip) • Press to skip back one track (DVD, CD, MP3, etc). • Press to skip forward one track (DVD, CD, MP3, etc). Reverse/Forward (Search) Normal x2 x4 x8 x16 x32 • Press to reverse through the disc. Each successive press of will change the rate of reverse playback. • Press to fast-forward through the disc. Each successive press of will change the rate of forward playback. Slow Normal x1/2 x1/4 x1/8 x1/16 x1/32 • Press SLOW for slow-motion playback. Each successive press of SLOW will change the rate of slow-motion playback. Press to resume normal playback. • Press STEP frame-by-frame playback. Each successive press of STEP will advance the video one frame. Press to resume normal playback. Note: Audio will be muted during fast-forward, fast-reverse, and slow-motion playback. 15