Compaq 15-s000 15 Notebook PC 15 Notebook PC Maintenance and Service Guide - Page 75
CAUTION, Flex the inside of the top edge
View all Compaq 15-s000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
3. Release the wireless antenna cables from the clips (3) built into the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 4. Remove the four Phillips PM2.5×5.0 screws (1) (two from each hinge) and one Phillips PM2.5×3.5 screw (2) (on the right hinge) that secures the display assembly to the computer. 5. Remove the display assembly (3). If it is necessary to replace any of the display assembly subcomponents: 1. To remove the display bezel: a. Flex the inside of the top edge (1), the left and right edges (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. Component replacement procedures 67