Compaq 159715-002 Deskpro EN Series of Personal Computers Maintenance and Serv - Page 40
Feet Installation, 4.4 Logo Plate
UPC - 720591238834
View all Compaq 159715-002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
4.3 Feet Installation Four (4) rubber feet are mounted to the chassis, as shown below. No parts have to be removed to access the feet. The replacement feet have an adhesive surface and are shipped with a protective backing in place. Remove the backing from the feet before installation. If necessary, remove the old feet and remove any adhesive residue from the chassis. 4.4 Logo Plate Grasp the open side of the logo plate (left side if a desktop, bottom if a minitower) and pull outward 2. To install a new logo plate, align the guide pins in the slots 1, then press into place. ✎ When replacing the logo plate, ensure that the alignment pins are properly placed in the front bezel before pressing the logo plate into position. Compaq Deskpro EN Series of Personal Computers 4-3