Compaq 2000 2510p Notebook PC Maintenance and Service Guide - Page 79
Remove the top cover., Reverse this procedure to install the top cover.
View all Compaq 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
5. Lift the rear edge of the top cover and swing it up and forward until the top cover rests upside down in front of the base enclosure. 6. Release the ZIF connector (1) to which the fingerprint reader board cable is connected and disconnect the fingerprint reader board cable (2) from the system board. 7. Remove the top cover. Reverse this procedure to install the top cover. Component replacement procedures 69
5.
Lift the rear edge of the top cover and swing it up and forward until the top cover rests upside
down in front of the base enclosure.
6.
Release the ZIF connector
(1)
to which the fingerprint reader board cable is connected and
disconnect the fingerprint reader board cable
(2)
from the system board.
7.
Remove the top cover.
Reverse this procedure to install the top cover.
Component replacement procedures
69