Compaq 255650-001 Compaq P710/P910/P1210 Color Monitor User's Guide - Page 20
Brightandcontrast.
View all Compaq 255650-001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
ENGLISH 17" Model Group Item Icon Icon Item Press the Minus Button Press the Plus Button SCREEN GEOMETRY VIDEO MISC. CONTRAST To decrease the contrast. To increase the contrast. BRIGHT To decrease the brightness. To increase the brightness. COLOR TEMPERATURE HORIZ-SIZE To decrease the color temperature. To increase the color temperature. When FPM is on, the color temperature is fixed to 9300K and it is not adjustable. To narrow the width of the image To expand the width of the image on the screen. on the screen. HORIZ-PHASE To move the image to the left. To move the image to the right. VERT-SIZE To narrow the height of the image To expand the height of the image on the screen. on the screen. VERT-POSITION To move the image down. To move the image up. PINCUSHION KEYSTONE TOP-PIN BOTTOM-PIN PIN-BALANCE KEY-BALANCE ROTATION To collapse the center of the image. To decrease the width at the top of the screen image and to increase the width at the bottom. To expand the width of the screen image near the corners of top. To expand the center of the image. To increase the width at the top of the screen image and to decrease the width at the bottom. To narrow the width of the screen image near the corners of top. To expand the width of the screen To narrow the width of the screen image near the corners of bottom. image near the corners of bottom. To move the top and bottom of the To move the top and bottom of screen image to the right. the screen image to the left. To make the screen slant to the To make the screen slant to the left. right. To rotate the image counterclockwise. To rotate the image clockwise. GEOMETRY RESET To restore to factory preset level. MOIRE CANCEL LEVEL To decrease the level of the moire-clear wave. CLAMP PULSE POSITION To eliminate an excessive green or white-back ground that may occur when external sync signals are applied to the monitor. To clamp the video signal at the front of the H-Sync pulse. To clamp the video signal at the back of the H-Sync pulse. VIDEO LEVEL DEGAUSS POWER-SAVE CONTROL LOCK DIAGNOSIS LANGUAGE To select 1.0V of video input. To select 0.7V of video input. To select the constant power consumption mode. To permit all OSD adjustments. To eliminate possible color shading or impurity. To select the power-save mode. To lock the OSD function except for "BRIGHT" and "CONTRAST". It shows the current scanning frequency and Preset No. or user mode. To choose the language used on OSD. ENG......English, ESP......Spanish, JPN......Japanese, GER......German, FRA......French - 9 -