Compaq 282790-003 HP Compaq Business Notebook nx7000/Compaq Presario Widescree - Page 114
Route the two antenna cables, out of the hole in the system
View all Compaq 282790-003 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Removal and Replacement Procedures 6. Turn the notebook top side up with the rear panel facing forward. 7. Release the ZIF connector 1 to which the TouchPad cable is attached and disconnect the TouchPad cable 2 from the system board. 8. Route the two antenna cables 3 out of the hole in the system board. Disconnecting the TouchPad Cable and Routing the Wireless Antenna Cables Maintenance and Service Guide 5-31
Removal and Replacement Procedures
Maintenance and Service Guide
5–31
6. Turn the notebook top side up with the rear panel facing
forward.
7. Release the ZIF connector
1
to which the TouchPad cable is
attached and disconnect the TouchPad cable
2
from the
system board.
8. Route the two antenna cables
3
out of the hole in the system
board.
Disconnecting the TouchPad Cable and Routing the Wireless
Antenna Cables