Compaq 325 Compaq 325 and 326 Notebook PCs HP 425 and 625 Notebook PCs - Maint - Page 91
Speaker, on the system board.
View all Compaq 325 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Speaker The spare part number for the speaker used in all models is 605792-001. Before removing the speaker, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the service door (see Service door on page 49). 6. Remove the palm rest (see Palm rest on page 64). 7. Remove the keyboard (see Keyboard on page 67). 8. Remove the top cover (see Top cover on page 71). Remove the speaker: 1. Disconnect the speaker cable from the connector (1) on the system board. 2. Remove the two screws from the speaker (2). 3. Lift the speaker up (3), and then release the cable from the cable retainers (4). 4. Remove the speaker and cable from the base enclosure. Reverse this procedure to install the speaker. Component replacement procedures 81