Compaq 6530s HP Compaq 6530s, 6531s and 6535s Notebook PCs - Maintenance and S - Page 77
Remove the three Phillips PM2.0×2.0 broadhead 5-mm screws from the optical drive bay
![]() |
View all Compaq 6530s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2. Remove the two rubber screw covers (1) and the seven slotted Torx ST8M2.5×7.0 screws (2) that secure the top cover to the computer. The rubber screw covers are available in the Rubber Kit, spare part numbers 497622-001 (for use only with HP Compaq 6535s Notebook PC models) and 491654-001 (for use only with HP Compaq 6530s and 6531s Notebook PC models). 3. Remove the three Phillips PM2.0×2.0 broadhead (5-mm) screws from the optical drive bay (1), and remove the Torx T8M2.5x4.0 screw from the hard drive bay (2). 4. Turn the computer right-side up. Component replacement procedures 69
![](/manual_guide/products/compaq-6530s-hp-compaq-6530s-6531s-6535s-notebook-pcs-maintenance-service-guide-cb92007/77.png)
2.
Remove the two rubber screw covers
(1)
and the seven slotted Torx ST8M2.5×7.0 screws
(2)
that
secure the top cover to the computer. The rubber screw covers are available in the Rubber Kit,
spare part numbers 497622-001 (for use only with HP Compaq 6535s Notebook PC models) and
491654-001 (for use only with HP Compaq 6530s and 6531s Notebook PC models).
3.
Remove the three Phillips PM2.0×2.0 broadhead (5-mm) screws from the optical drive bay
(1)
, and
remove the Torx T8M2.5x4.0 screw from the hard drive bay
(2)
.
4.
Turn the computer right-side up.
Component replacement procedures
69