Compaq 7470 Service Guide - Page 40
Power Supply
UPC - 720591313395
View all Compaq 7470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
MSG index Home Maintenance and Service Guide Compaq Presario 7400 Series Computers Product Description Removal & Replacement Troubleshooting Jumper & Switch Information Illustrated Parts Catalog Specifications Removal Sequence Before you begin Serial number Chassis Power supply Mass storage devices Fax-modem PCI bracket System board Instant On button board Creativity Action Center REMOVAL & REPLACEMENT PROCEDURES Power Supply 1 Perform preparation procedures. 2 Remove the chassis. 3 Gently lay the computer on its side with back connectors closest to the working surface. 4 Remove the four screws that secure the power supply to the back of the chassis as shown. 5 Slide the power supply away from the back of the chassis , rotate it up and away , and slide it to the right to remove it from the slots. 6 Disconnect the power supply cables from the system board, hard drive, floppy drive, and CD/DVD drive and remove the cables from the chassis. Replacement To replace the power supply, reverse this procedure.