Compaq 8100 Maintenance and Service Guide: HP Compaq 8100 and 8180 Elite Busin - Page 62
Expansion Cards
View all Compaq 8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Expansion Cards The computer has three standard full-height PCI expansion slots, one PCI Express x1 expansion slot, one PCI Express x16 expansion slot, and one PCI Express x16 expansion slot that is downshifted to a x4 slot. Figure 6-17 Expansion Slot Locations Table 6-2 Expansion Slot Locations Item Description 1 PCI expansion slot 2 PCI expansion slot 3 PCI expansion slot 4 PCI Express x16 expansion slot that is downshifted to a x4 slot 5 PCI Express x16 expansion slot 6 PCI Express x1 expansion slot NOTE: You can install a PCI Express x1, x8, or x16 expansion card in the PCI Express x16 slots. For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16 slot that is NOT downshifted to a x4 slot. To remove, replace, or add an expansion card: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 35). 2. Remove the computer access panel (Computer Access Panel on page 43). 3. Locate the correct vacant expansion socket on the system board and the corresponding expansion slot on the back of the computer chassis. 52 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis