Compaq 8180 Maintenance and Service Guide: HP Compaq 8100 and 8180 Elite Busin - Page 61
Installing a DIMM,
View all Compaq 8180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
4. Open both latches of the memory module socket (1), and insert the memory module into the socket (2). Figure 6-16 Installing a DIMM NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket. A DIMM must occupy the black XMM1 socket. Populate the DIMM sockets in the following order: XMM1, XMM3, XMM2, then XMM4. For maximum performance, populate the sockets so that the memory capacity is spread as equally as possible between Channel A and Channel B. 5. Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3). 6. Repeat steps 4 and 5 to install any additional modules. 7. Replace the computer access panel. 8. Reconnect the power cord and turn on the computer. 9. Lock any security devices that were disengaged when the computer access panel was removed. The computer should automatically recognize the additional memory the next time you turn on the computer. Installing Additional Memory 51