Compaq Armada E700 Compaq ArmadaStation EM Maintenance and Service Guide - Page 47
half-height bay., Install the four screws
View all Compaq Armada E700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
10. Align the front cover of the half-height drive with the tab on the front of the bezel cage (Figure 5-17). NOTE: The bezel cage should be aligned so the "L" and "LEFT" indicators can be read when the half-height drive is installed in the expansion base left half-height bay. 11. Install the four screws that secure the half-height drive to the bezel cage. Figure 5-17. Attaching the Bezel Cage to the Half-Height Drive Removal and Replacement Procedures 5-17
Removal and Replacement Procedures
5-17
10. Align the front cover of the half-height drive with the tab on the front of the bezel
cage
(Figure 5-17).
NOTE:
The bezel cage should be aligned so the “L” and “LEFT” indicators can
be read when the half-height drive is installed in the expansion base left
half-height bay.
11. Install the four screws
that secure the half-height drive to the bezel cage.
Figure 5-17.
Attaching the Bezel Cage to the Half-Height Drive