Compaq Armada e500 Compaq ArmadaStation EM Maintenance and Service Guide - Page 37
Rear Bezel, Slide the rear bezel release latch to the left
View all Compaq Armada e500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5.6 Rear Bezel 1. Prepare the expansion base for disassembly (Section 5.3). 2. Remove the connector cover (Section 5.5). 3. Slide the rear bezel release latch to the left (Figure 5-7). 4. Swing the bottom edge of the rear bezel forward and up until it disengages . Figure 5-7. Removing the Rear Bezel Removal and Replacement Procedures 5-7
Removal and Replacement Procedures
5-7
5.6
Rear Bezel
1. Prepare the expansion base for disassembly (Section 5.3).
2. Remove the connector cover (Section 5.5).
3. Slide the rear bezel release latch to the left
(Figure 5-7).
4. Swing the bottom edge of the rear bezel forward and up until it disengages
.
Figure 5-7.
Removing the Rear Bezel