Compaq CQ45-800 Maintenance and Service Guide - Page 57
Hall sensor board, Remove the system board see
View all Compaq CQ45-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
screws that secure the tweeters to the computer (5), and then attach the left and right speaker cables to the system board (6). Hall sensor board To remove the hall sensor board, use this procedure and illustration. Table 5-13 Hall sensor board description and part number Description Hall sensor board Hall sensor board cable Spare part number N13372-001 N13376-001 Before removing the hall sensor board, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 33). 2. Remove the bottom cover (see Bottom cover on page 33). 3. Remove the battery (see Battery on page 34). 4. Remove the heat sink (see Heat sink on page 40). 5. Remove the display assembly panel (see Display assembly panel on page 43). 6. Remove the fan assembly (see Fan assembly on page 41). 7. Remove the system board (see System board on page 44.) Remove the hall sensor board: 1. Disconnect the hall sensor board cable (1). 2. Remove the Phillips M2.0 × 2.5 screw (2) that secures the hall sensor board to the computer. 50 Chapter 5 Removal and replacement procedures for authorized service provider parts