Compaq CRT Monitor s7500 Service Manual - Page 11

Set B-DRIVE to 905A; LG CDT at DRIVE of

Get Compaq CRT Monitor s7500 PDF manuals and user guides View all Compaq CRT Monitor s7500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

14) Set Brightness is cut-off(0.06FL) and Contrast to Max position. 15) Set SUB-CONTRAST Max 127(7F) (decimal) position. 16) Set B-DRIVE to 90(5A); LG CDT at DRIVE of the alignment program. (TECO CDT: B-DRIVE 100(64)) 17-1) Adjust R-DRIVE and G-DRIVE command to white balance x=0.283±0.003 and y=0.298±0.003 at FullWhite on the White Balance Meter with PC arrow keys. 17-2) Display color 15,0 window pattern 5Box 50x50mm at mode 8. 18) Adjust SUB-CONTRAST command to 50±1FL at B/Raster 0.06FL. 19) Display color 15,0 full white patten at Mode 8. 20) Set Brightness and Contrast to Max position. 21) COLOR ADJ. → LUMINANCE → ABL command. 22) Adjust ABL to 33±1FL of the luminance at B/Raster 0.06FL. 23) After push the "ENTER" key, and "COMMAND → PRESET EXIT → Y(Yes)" command. 24) Exit from the program. 5. Input EDID Data. 1) Display color 15,0 cross hatch pattern at Mode 8. 2) EEPROM → Write EDID command and confirm "EDID Write OK!!" message of monitor. 3) Exit from the alignment program. 4) Power switch OFF/ON for EDID data save. 6. Adjustment for Focus. 1) Set the Brightness and Contrast to max position. 2) Display cross hatch with quadrant text pattern in full screen at Mode 8. 3) Adjust two Focus control on the FBT that focus should be the best condition. - 11 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
- 11 -
14)
Set Brightness is cut-off(0.06FL) and Contrast to
Max position.
15)
Set SUB-CONTRAST Max 127(7F) (decimal) position.
16)
Set B-DRIVE to 90(5A); LG CDT at DRIVE of the
alignment program.
(TECO CDT: B-DRIVE 100(64))
17-1)
Adjust R-DRIVE and G-DRIVE command to white
balance x=0.283
±
0.003 and y=0.298
±
0.003 at Full-
White on the White Balance Meter with PC arrow keys.
17-2)
Display color 15,0 window pattern 5Box 50x50mm at
mode 8.
18)
Adjust SUB-CONTRAST command to 50
±
1FL at
B/Raster 0.06FL.
19)
Display color 15,0 full white patten at Mode 8.
20)
Set Brightness and Contrast to Max position.
21)
COLOR ADJ.
→
LUMINANCE
→
ABL command.
22)
Adjust ABL to 33
±
1FL of the luminance at B/Raster 0.06FL.
23)
After push the “ENTER” key, and “COMMAND
→
PRESET EXIT
→
Y(Yes)” command.
24)
Exit from the program.
5. Input EDID Data.
1)
Display color 15,0 cross hatch pattern at Mode 8.
2) EEPROM
→
Write EDID command and confirm
“EDID Write OK!!” message of monitor.
3)
Exit from the alignment program.
4)
Power switch OFF/ON for EDID data save.
6. Adjustment for Focus.
1)
Set the Brightness and Contrast to max position.
2)
Display cross hatch with quadrant text pattern in full
screen at Mode 8.
3)
Adjust two Focus control on the FBT that focus
should be the best condition.