Compaq Deskpro 2000 Deskpro Personal Computers Service Reference Guide - Page 54
-912, Been Removed Since Last
View all Compaq Deskpro 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
POST Error Messages Continued Screen Message Beeps* 601-Diskette Controller Error None Probable Cause Diskette controller circuitry or floppy drive circuitry incorrect. Recommended Action 1. Run Computer Setup (F10 Setup). 2. Check and/or replace cables. 3. Clear CMOS. 4. Replace diskette drive. 5. Replace the system board. 602-Diskette Boot Record Error None Diskette in drive A not bootable. Replace the diskette. 605-Diskette Drive Type 2S Error Mismatch in drive type. 1. Run Computer Setup (F10 Setup) or Windows NT, Windows 95, or Windows 98 utilities. 2. Disconnect any other diskette controller devices (tape drives). 3. Clear CMOS. 610-External Storage Device Failure None External tape drive not connected. Reinstall tape drive or press F1 and allow system to reconfigure without the drive. 611-Primary Floppy Port 2S Address Assignment Conflict Configuration error. 1. Run Computer Setup (F10 Setup). 2. Remove expansion cards. 3. Clear CMOS. 612-Secondary Floppy Port 2S Address Assignment Conflict 660-Display Cache is Detected Unreliable None 912-Computer Cover Has Been Removed Since Last System Start Up * L = Long, S = Short None Configuration error. 1. Run Computer Setup (F10 Setup). 2. Remove expansion cards 3. Clear CMOS. Integrated video controller Replace system board if minimal display cache not working video degrading is an issue. properly and will be disabled. No action required. continued D-4 POST Error Messages