Compaq Evo n1020v Maintenance and Service Guide - Page 154
Speaker Assembly
View all Compaq Evo n1020v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Removal and Replacement Procedures 3. Remove the three TM2.5 × 5.0 screws 1 that secure the charger board to the base enclosure (Figure 5-37). 4. Lift the front edge of the charger board shield 2 until it clears the base enclosure, then slide the shield forward to remove it. 5. Lift up on the back edge of the charger board 3 to disconnect it from the system board. 6. Remove the charger board 4 from the base enclosure. Figure 5-37. Removing the Charger Board Reverse the preceding procedures to install the charger board. 5.19 Speaker Assembly Speaker Assembly Spare Part Number Information Speaker assembly 285538-001 1. Prepare the computer for disassembly (Section 5.3). 2. Remove the palm rest (Section 5.14). 5-48 Maintenance and Service Guide