Compaq Evo n1050v Maintenance and Service Guide - Page 64
Removing the I/R PCA, Reassembly Note, CAUTION, Remove the I/R PCA.
View all Compaq Evo n1050v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3. Disconnect the I/R PCA cable from the motherboard. 4. Remove the two M2.5×4.0mm screws that secure the I/R PCA to the bottom case. 5. Remove the I/R PCA. Reassembly Note Figure 2-24. Removing the I/R PCA CAUTION: Use care when handling the I/R PCA cable. Damaging the cable can degrade notebook performance. Make sure you route the I/R PCA cable between the left screw hole and the bottom case. 2-34 Removal and Replacement Service Manual
2-34
Removal and Replacement
Service Manual
3.
Disconnect the I/R PCA cable from the motherboard.
4.
Remove the two M2.5×4.0mm screws that secure the I/R PCA to the bottom case.
5.
Remove the I/R PCA.
Figure 2-24. Removing the I/R PCA
Reassembly Note
CAUTION:
Use care when handling the I/R PCA cable. Damaging the cable can degrade
notebook performance.
Make sure you route the I/R PCA cable between the left screw hole and the bottom case.