Compaq Evo n1050v Service Manual - Page 114
Fully tighten the screws in the order stamped on the heat sink., Install all four screws lightly.
![]() |
View all Compaq Evo n1050v manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Caution Do not spin the fan blades with your finger or you could damage the fan's bearings. Reassembly Notes • If the thermal pad is damaged, use a sharp knife or scraper to carefully remove it from the heat sink, then attach a new thermal pad. • Install the heat sink screws in this order: 1. Install all four screws lightly. 2. Fully tighten the screws in the order stamped on the heat sink. Service Manual Removal and Replacement 2-43
![](/manual_guide/products/compaq-presario-1100-service-manual-1e8b977/114.png)
Caution
Do not spin the fan blades with your finger or you could damage the fan²s bearings.
Reassembly Notes
•
If the thermal pad is damaged, use a sharp knife or scraper to carefully remove it from the heat
sink, then attach a new thermal pad.
•
Install the heat sink screws in this order:
1.
Install all four screws lightly.
2.
Fully tighten the screws in the order stamped on the heat sink.
Service Manual
Removal and Replacement
2-43