Compaq Evo n180 Maintenance and Service Guide Compaq Evo N180 Series - Page 99
Removing the Display Part 1, that secure
View all Compaq Evo n180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Removal and Replacement Procedures 7. Disconnect the display cable 1 from the system board (Figure 5-20). 8. Remove the two PM2.0 × 8.0 screws 2 that secure the display hinges to the base enclosure. 9. Remove the two black PM1.5 × 5.0 screws 3 that secure the hinge covers to the base enclosure. Figure 5-20. Removing the Display (Part 1) Maintenance and Service Guide 5-27
Removal and Replacement Procedures
Maintenance and Service Guide
5–27
7.
Disconnect the display cable
1
from the system board
(Figure 5-20).
8.
Remove the two PM2.0 × 8.0 screws
2
that secure the
display hinges to the base enclosure.
9.
Remove the two black PM1.5 × 5.0 screws
3
that secure the
hinge covers to the base enclosure.
Figure 5-20. Removing the Display (Part 1)