Compaq Evo n400c Compaq Evo Notebook N410c Series and N410c Series Maintenance - Page 115
Removing the Display, Remove the four TM2.0 × 6.0 screws
View all Compaq Evo n400c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Removal and Replacement Procedures 2. Disconnect the display signal 1 and backlight 2 cables from the system board (Figure 5-23). ✎ When the display screws are removed, the display assembly is unsupported. Make sure to provide support for the display assembly when removing the display screws. 3. Remove the four TM2.0 × 6.0 screws 3 that secure the display to the base enclosure. 4. Remove the display. Figure 5-23. Removing the Display 5-30 Maintenance and Service Guide
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
2.
Disconnect the display signal
1
and backlight
2
cables from
the system board (Figure 5-23).
✎
When the display screws are removed, the display assembly is
unsupported. Make sure to provide support for the display
assembly when removing the display screws.
3. Remove the four TM2.0 × 6.0 screws
3
that secure the
display to the base enclosure.
4. Remove the display.
Figure 5-23. Removing the Display