Compaq Evo n800c Maintenance and Service Guide - Page 123
Preparing the Computer for Disassembly
View all Compaq Evo n800c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Removal and Replacement Procedures 5.3 Preparing the Computer for Disassembly Perform the following steps before disassembling the computer: 1. Turn off the computer. 2. Disconnect the AC adapter and all external devices. 3. Remove the battery pack by following these steps: a. Turn the computer bottom side up with the left side facing forward. b. Slide and hold the battery release latch 1 toward the back of the computer (Figure 5-2). c. Use the notch in the battery bay to slide the battery pack out of the battery bay 2. d. Remove the battery pack. Figure 5-2. Removing the Battery Pack Reverse the above procedures to install the battery pack. 5-4 Maintenance and Service Guide
5–4
Maintenance and Service Guide
Removal and Replacement Procedures
5.3
Preparing the Computer for
Disassembly
Perform the following steps before disassembling the computer:
1. Turn off the computer.
2. Disconnect the AC adapter and all external devices.
3. Remove the battery pack by following these steps:
a.
Turn the computer bottom side up with the left side
facing forward.
b.
Slide and hold the battery release latch
1
toward the back
of the computer (Figure 5-2).
c.
Use the notch in the battery bay to slide the battery pack
out of the battery bay
2
.
d.
Remove the battery pack.
Figure 5-2. Removing the Battery Pack
Reverse the above procedures to install the battery pack.