Compaq Evo n800w Maintenance and Service Guide - Page 136
Removing the LED Cover, LED cover.
View all Compaq Evo n800w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Removal and Replacement Procedures 6. Use a flat-bladed tool to pry forward on the four clips on the LED cover 1 (Figure 5-14). 7. Press the esc and F1 keys to reveal the left notch 2 in the LED cover. 8. Insert a flat-bladed tool into the left notch and lift the left side of the LED cover 3. 9. Press the Pause and Del keys to reveal the right notch 4 in the LED cover. 10. Insert a flat-bladed tool into the right notch and lift the right side of the LED cover 5. 11. Remove the LED cover 6. Figure 5-14. Removing the LED Cover Reverse the above procedure to install the LED cover. Maintenance and Service Guide 5-17
Removal and Replacement Procedures
Maintenance and Service Guide
5–17
6. Use a flat-bladed tool to pry forward on the four clips on the
LED cover
1
(Figure 5-14).
7.
Press the
esc
and
F1
keys to reveal the left notch
2
in the LED
cover.
8.
Insert a flat-bladed tool into the left notch and lift the left side
of the LED cover
3
.
9. Press the
Pause
and
Del
keys to reveal the right notch
4
in the
LED cover.
10. Insert a flat-bladed tool into the right notch and lift the right
side of the LED cover
5
.
11. Remove the LED cover
6
.
Figure 5-14. Removing the LED Cover
Reverse the above procedure to install the LED cover.