Compaq L2206tm User Guide

Compaq L2206tm Manual

Get Compaq L2206tm PDF manuals and user guides View all Compaq L2206tm manuals
Add to My Manuals
Save this manual to your list of manuals

Compaq L2206tm manual content summary:

  • Compaq L2206tm | User Guide - Page 1
    HP Compaq L2206tm and L2206tmp LED Backlit Touch Monitors User Guide
  • Compaq L2206tm | User Guide - Page 2
    and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors
  • Compaq L2206tm | User Guide - Page 3
    About this guide This guide provides information on setting up the monitor, operating the touch screen, troubleshooting, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
  • Compaq L2206tm | User Guide - Page 4
    iv About this guide
  • Compaq L2206tm | User Guide - Page 5
    Table of contents 1 Product features ...1 HP LCD Touch Monitors ...1 2 Safety and maintenance touch screen ...17 Installing the touch software ...17 Microsoft Windows 7/Vista/XP (plug and play 17 Using the touch function ...19 Using an extended display (Windows 7 only 19 Tips and troubleshooting
  • Compaq L2206tm | User Guide - Page 6
    preset display resolutions 26 L2206tm/L2206tmp ...26 Entering user modes ...27 Energy saver feature ...27 Appendix B Support and troubleshooting ...28 Solving common problems ...28 Button lockouts ...29 Product support ...29 Preparing to call technical support ...29 Appendix C LCD monitor
  • Compaq L2206tm | User Guide - Page 7
    features HP LCD Touch Monitors The LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) panel. The monitor models and features include: ● L2206tm model, 54.6 cm (21.5-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for
  • Compaq L2206tm | User Guide - Page 8
    Notices provided on your media disc, if one is included, or in your documentation kit. To locate updates to the user guide for your product, go to http://www.hp.com/support, and select your country. Select Drivers & Downloads, and then follow the on-screen instructions. 2 Chapter 1 Product features
  • Compaq L2206tm | User Guide - Page 9
    work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp and correctly sized furniture designed to properly support your HP LCD monitor. WARNING! LCD monitors that screen. Important safety information 3
  • Compaq L2206tm | User Guide - Page 10
    instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service cord from the back of the unit. 2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth. 3. For more difficult cleaning
  • Compaq L2206tm | User Guide - Page 11
    and then follow the instructions below. Unfolding the monitor pedestal base NOTE: The L2206tm panel head model does display head 90 degrees (2). CAUTION: Do not touch the surface of the LCD panel. Pressure on the liquid crystals. If this occurs, the screen will not recover to its normal condition.
  • Compaq L2206tm | User Guide - Page 12
    host USB port/hub. Connect optional USB devices to the monitor. Housed in rear enclosure. When removed, it can be used as a touch pointing device. NOTE: The stylus is not required for optical touch applications. Fingers and other pointing instruments may be used. 6 Chapter 3 Setting up the monitor
  • Compaq L2206tm | User Guide - Page 13
    Figure 3-3 Removing the cable management clip NOTE: The L2206tm panel head model does not ship with a stand. cable. NOTE: The monitor is capable of supporting either analog or digital input. The video on the front panel or through the on-screen display (OSD) feature by pressing the Menu button
  • Compaq L2206tm | User Guide - Page 14
    ensuring that the tabs on the sides of the clip snap into the slots on the pedestal. Figure 3-5 Installing the cable management clip NOTE: The L2206tm panel head model does not ship with a stand. 8 Chapter 3 Setting up the monitor
  • Compaq L2206tm | User Guide - Page 15
    is positioned low and reclined may be more comfortable for users with corrective lenses. The monitor should be repositioned as you adjust your working posture throughout the work day. NOTE: When the monitor is unfolded for the first time, the display head is locked from adjusting to a full-height
  • Compaq L2206tm | User Guide - Page 16
    with the base and potentially cause damage to the monitor. Figure 3-8 Pivoting the monitor NOTE: To view information on the screen in portrait mode, you can install the HP Display Assistant software included on the software and documentation disc. The position of the OSD menu can also be rotated to
  • Compaq L2206tm | User Guide - Page 17
    is on, press to select the highlighted menu item. If the OSD menu is inactive, press to activate the auto adjustment feature to optimize the screen image. Turns the monitor on or off. Blue = Fully powered. Amber = Sleep mode. Flashing Amber = Sleep timer mode. NOTE: To view an OSD menu simulator
  • Compaq L2206tm | User Guide - Page 18
    it is not in use for a prolonged period of time. Image retention is a condition that may occur on all LCD screens. Monitors with a "burned-in image" are not covered under the HP warranty. NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be enabled. To disable
  • Compaq L2206tm | User Guide - Page 19
    Connecting USB devices USB connectors are used to connect devices such as a digital camera, USB keyboard, or USB mouse. Two USB connectors are located on the side panel of the monitor. NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0 ports on the
  • Compaq L2206tm | User Guide - Page 20
    Removing the monitor pedestal base NOTE: The L2206tm panel head model does not ship with a stand. You can remove the monitor panel from the pedestal base to install the panel on a wall, swing
  • Compaq L2206tm | User Guide - Page 21
    swing arm, or other mounting fixture. NOTE: This apparatus is intended to be supported by a UL or CSA listed wall mount bracket. 1. Remove the monitor monitor To attach the monitor to other mounting fixtures, follow the instructions included with the mounting fixture to ensure that the monitor is
  • Compaq L2206tm | User Guide - Page 22
    rating labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor display head. Figure 3-14 Locating the rating labels
  • Compaq L2206tm | User Guide - Page 23
    , launch, and drag objects using the touch screen. To make a selection, touch the screen. NOTE: For Windows XP, the touch driver loads as an input device, so there will be no message verifying the driver installation. NOTE: Multi-touch gestures are supported in Windows 7 Home Premium, Professional
  • Compaq L2206tm | User Guide - Page 24
    System, and then select the Hardware tab. Select the Device Manager button. If the driver is installed correctly, two HID-compliant device entries and one USB Human Interface Device entry entry will appear. Figure 4-1 Verify Windows XP touch driver installation 18 Chapter 4 Operating the touch screen
  • Compaq L2206tm | User Guide - Page 25
    Basic or Starter editions. Using an extended display (Windows 7 only) Windows 7 Home Premium, Professional, Enterprise, and Ultimate editions support extended display touch screen functions for two monitors connected to one system. NOTE: Windows 7 Home Basic and Starter editions, Windows Vista, and
  • Compaq L2206tm | User Guide - Page 26
    4. Select the Tablet PC Settings control panel. NOTE: The Tablet PC Settings control panel will only appear after Microsoft Windows 7 recognizes a connected touch monitor. 5. On the Display tab in the Tablet PC Settings, select the name of the first monitor you want to calibrate from the drop-down
  • Compaq L2206tm | User Guide - Page 27
    6. Select the Calibrate... button. Figure 4-4 Calibrate the display 7. Repeat steps 5 and 6 for the second monitor. NOTE: If you have two monitors that are the same model, be sure to note which model is calibrated first because both will appear with identical names. Using the touch function 21
  • Compaq L2206tm | User Guide - Page 28
    repair the product yourself. If your problem cannot be solved according to the troubleshooting guidelines, please contact your local dealer. HP cleaner fluid onto cloth and use the damp cloth to gently wipe the screen surface and front bezel inside edge. Never spray the cleaner directly on the screen
  • Compaq L2206tm | User Guide - Page 29
    Touch screen troubleshooting NOTE: For general troubleshooting information, refer to Support and troubleshooting on page 28. Table 4-2 Touch screen troubleshooting Problem Solution Computer does not recover from Sleep mode when the touch Sleep mode recovery is not supported by the touch screen.
  • Compaq L2206tm | User Guide - Page 30
    A Technical specifications NOTE: All specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. L2206tm/L2206tmp Table A-1 L2206tm/L2206tmp specifications Display 54.61 cm widescreen Type TFT LCD Viewable
  • Compaq L2206tm | User Guide - Page 31
    Pixels per inch 102 PPI Horizontal frequency 24 kHz to 94 kHz Vertical refresh rate 50 Hz to 76 Hz *The L2206tm panel head model does not ship with a stand. Environmental requirements: Temperature (operating) Temperature (non-operating) Humidity (operating) Humidity (non-operating) Altitude
  • Compaq L2206tm | User Guide - Page 32
    as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. L2206tm/L2206tmp Table A-2 Factory preset modes Preset Pixel format 1 640 × 480 2 720 × 400 3 800 × 600 4 1024 × 768 5 1280 × 720 6 1280 × 1024
  • Compaq L2206tm | User Guide - Page 33
    stored. Energy saver feature The monitors support a reduced power state. The absence of these signals, the monitor screen is blanked, the backlight is manual for instructions on setting energy saver features (sometimes called power management features). NOTE: The above power saver feature only works
  • Compaq L2206tm | User Guide - Page 34
    Support and troubleshooting Solving common problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen Set Auto-Switch Input to Off and manually select the input. Image appears blurred,
  • Compaq L2206tm | User Guide - Page 35
    , it is available in English. ● Find support telephone numbers ● Locate an HP service center Preparing to call technical support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you
  • Compaq L2206tm | User Guide - Page 36
    uses high-precision technology that is manufactured according to HP standards to guarantee trouble-free performance. Nevertheless, the display may have cosmetic operating mode, at a supported resolution and refresh rate, and from a distance of approximately 50 cm (20 in). HP expects that, over time,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
HP Compaq L2206tm and L2206tmp
LED Backlit Touch Monitors
User Guide