Compaq ML330e Compaq ProLiant ML330e/ ML330 Server Maintenance and Service Gui - Page 49
Table 3-1, Diagnostics Tools, What it is, How to run - memory upgrade
UPC - 720591690243
View all Compaq ML330e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Diagnostics Tools 3-3 Table 3-1 Diagnostics Tools continued Tool What it is Compaq SmartStart Located on the SmartStart and Support Software CD, SmartStart is the intelligent way to set up your Compaq server. SmartStart includes the ROMPaq™ Utility, driver updates, and assisted operating system installations. Array Diagnostics Utility (ADU) A Windows-based tool designed to run on all Compaq systems that support Compaq array controllers. The main functions of ADU are to collect all possible information about the array controllers in the system and to generate a list of detected problems. Integrated Management Log BIOS Setup utility for the ProLiant ML330 server A log of system events, such as system failures or nonfatal error conditions. View events from within: Compaq Insight Manager Compaq Survey Utility OS-specific IML Utilities Utility used to configure the hardware installed in or connected to the server. Specifically, it can: Configure PCI boards automatically Manage installation of memory, processor upgrades, and mass storage devices such as hard drives, tape drives, and diskette drives Store configuration information in nonvolatile memory Assist in installation of an operating system How to run it Power up from the SmartStart and Support Software CD. Power up from the SmartStart and Support Software CD or use the Diskette Builder (also located on the CD) to create ADU bootable diskettes. Use the information provided in the ADU. For a complete list of ADU error messages, see the Compaq Servers Troubleshooting Guide. The IML requires Compaq operating system-dependent drivers. Refer to the Compaq Software Support CD for instructions on installing the appropriate drivers. The BIOS Setup utility is loaded during POST if F10 is pressed. When "F10Setup" is displayed in the lower right corner of the screen, press F10 to initiate the utility. continued