Compaq ML530 Implementing Microsoft Windows Server 2003 with Service Pack 1 on - Page 14
Lights-Out management support, SmartStart installation paths, Pre-installation tasks - manual
UPC - 720591250218
View all Compaq ML530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
The following Hot Plug RAID Memory driver and utility are included in Version 7.30A and later of the ProLiant Support Pack for Microsoft Windows Server 2003: • HP ProLiant Hot-Plug Memory Configuration Utility for Windows Server 2003 • HP ProLiant Hot Plug Memory Driver for Windows Server 2003 Lights-Out management support Lights-Out management products, such as Integrated Lights-Out 2 (iLO 2), Integrated Lights-Out (iLO), and Remote Insight Lights-Out Edition II (RILOE II), remain an important part of the ProLiant solution adding support for the Windows Server 2003 operating system. Drivers for these products are included in the ProLiant Support Pack for Microsoft Windows Server 2003. Refer to the QuickSpecs for information regarding supported remote management features and functionality on Windows Server 2003: www.hp.com/servers/lights-out. SmartStart installation paths Server deployment of Microsoft Windows Server 2003 SP1 is consistent and easy every time with ROM-based utilities, whether you choose a SmartStart assisted installation or a manual operating system installation. To fully optimize the performance of your hardware platform, a SmartStart assisted installation walks you through the entire operating system installation process. Using an assisted installation, SmartStart prepares the server for installation, allows you to install the operating system using the vendorsupplied CDs, and provides automated installation of server support software using ProLiant Support Packs (PSPs). For a manual installation of the operating system, you can take advantage of the ROM-based utilities and vendor-supplied operating system media before manually installing server support software from the SmartStart CD. For more information on SmartStart, go to the SmartStart website at www.hp.com/servers/smartstart. The installation guide, available on this website, walks you through both SmartStart installation paths. Pre-installation tasks To prepare for installation, gather the supported software detailed below. 1. Obtain ProLiant Support Pack (PSP) for Microsoft Windows Server 2003 Version 7.30A (or later) at http://h18023.www1.hp.com/support/files/server/us/locate/3376.html or from the SmartStart 7.30 CD. This PSP contains device drivers, management agents, and utilities supported under Windows Server 2003. Note: Once the ProLiant Support Pack for Microsoft Windows Server 2003 Version 7.30A (or later) is installed, you can use HP Systems Insight Manager available at www.hp.com/go/hpsim to manage your Windows Server 2003 servers. 14