Compaq Mini 102 Compaq Mini CQ10 Notebook PC and Compaq Mini 102 Notebook PC - - Page 74
If it is necessary to replace the speaker assembly, perform the following steps
View all Compaq Mini 102 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
6. If it is necessary to replace the display panel, perform the following steps: a. Remove the 7 Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure. b. Lift the display panel up from the display enclosure (1). c. Disconnect the webcam cable (2) from the system board (2) d. Remove the display panel (3) from the display enclosure. 7. If it is necessary to replace the speaker assembly, perform the following steps: a. Remove the two Phillips PM2.0×3.0 screws (1) that secure the speaker assembly to the display enclosure. 66 Chapter 4 Removal and replacement procedures
6.
If it is necessary to replace the display panel, perform the following steps:
a.
Remove the 7 Phillips PM2.0×3.0 screws that secure the display panel to the display
enclosure.
b.
Lift the display panel up from the display enclosure
(1)
.
c.
Disconnect the webcam cable
(2)
from the system board
(2)
d.
Remove the display panel
(3)
from the display enclosure.
7.
If it is necessary to replace the speaker assembly, perform the following steps:
a.
Remove the two Phillips PM2.0×3.0 screws
(1)
that secure the speaker assembly to the
display enclosure.
66
Chapter 4
Removal and replacement procedures