Compaq Presario C300 HP G3000 Notebook PC and Compaq Presario C300 Notebook PC - Page 158
both surfaces before the fan/heat sink assembly is reinstalled.
View all Compaq Presario C300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Removal and Replacement Procedures ✎ The thermal paste should be thoroughly cleaned from the surfaces of the processor 1 and system board 2 and the fan/heat sink assembly 3 and 4 each time the fan/heat sink assembly is removed. Thermal paste should be reapplied to both surfaces before the fan/heat sink assembly is reinstalled. Thermal paste is included with all fan/heat sink assembly and processor spare part kits. Replacing the Thermal Paste Reverse the above procedure to install the fan/heat sink assembly. 5-64 Maintenance and Service Guide
5–64
Maintenance and Service Guide
Removal and Replacement Procedures
✎
The thermal paste should be thoroughly cleaned from the
surfaces of the processor
1
and system board
2
and the
fan/heat sink assembly
3
and
4
each time the fan/heat sink
assembly is removed. Thermal paste should be reapplied to
both surfaces before the fan/heat sink assembly is reinstalled.
Thermal paste is included with all fan/heat sink assembly and
processor spare part kits.
Replacing the Thermal Paste
Reverse the above procedure to install the fan/heat sink assembly.