Compaq Presario C700 Drives - Windows Vista - Page 15
Replace the 2 hard drive screws, Align the tabs - hard drive replacement
View all Compaq Presario C700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
10. Disconnect the hard drive (2) by sliding it to the left. 11. Lift the hard drive away from the computer (3). To install a hard drive: 1. Lower the hard drive into the hard drive bay (1). 2. Slide the hard drive toward the hard drive connector (2) until it is fully seated. 3. Replace the 2 hard drive screws (3). 4. Align the tabs (1) on the hard drive cover with the notches on the computer. 5. Close the cover (2). 9
10.
Disconnect the hard drive
(2)
by sliding it to the left.
11.
Lift the hard drive away from the computer
(3)
.
To install a hard drive:
1.
Lower the hard drive into the hard drive bay
(1)
.
2.
Slide the hard drive toward the hard drive connector
(2)
until it is fully seated.
3.
Replace the 2 hard drive screws
(3)
.
4.
Align the tabs
(1)
on the hard drive cover with the notches on the computer.
5.
Close the cover
(2)
.
9