Compaq Presario CQ20-100 Compaq Presario CQ20 Notebook PC - Maintenance and Se - Page 53
Remove the four Torx T8M2.0×6.0 screws, Remove the two rubber screw covers
View all Compaq Presario CQ20-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Removal and replacement procedures 5. Remove the four Torx T8M2.0×6.0 screws 1 that secure the display assembly to the computer. Be sure to hold the display before removing the last screw to prevent damage to the display. 6. Lift the display assembly 2 straight up and remove it. Perform the following steps in sequence to remove or replace the display bezel or the display assembly internal components. 7. To remove the display bezel: a. Remove the two rubber screw covers 1 at the bottom of the display assembly and peel back the two rubber bumper strips 2 at the top of the display assembly. 4-24 Maintenance and Service Guide
4–24
Maintenance and Service Guide
Removal and replacement procedures
5.
Remove the four Torx T8M2.0×6.0 screws
1
that secure the display assembly to the computer. Be sure to hold
the display before removing the last screw to prevent damage to the display.
6. Lift the display assembly
2
straight up and remove it.
Perform the following steps in sequence to remove or replace the display bezel or the display assembly internal
components.
7. To remove the display bezel:
a.
Remove the two rubber screw covers
1
at the bottom of the display assembly and peel back the two rubber
bumper strips
2
at the top of the display assembly.