Compaq Presario CQ20-200 Compaq Presario CQ20 Notebook PC - Maintenance and Se - Page 38
from each side of the hard drive., Remove the two Phillips PM3.0×3.0 hard drive bracket screws
View all Compaq Presario CQ20-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Removal and replacement procedures 4. Loosen the Phillips PM2.5×10.0 captive screw 1 that secures the hard drive to the computer. 5. Grasp the Mylar tab 2 on the hard drive and slide the hard drive 3 away from the hard drive connector. 6. Remove the hard drive 4 from the hard drive bay. 7. If it is necessary to replace the hard drive bracket a. Remove the two Phillips PM3.0×3.0 hard drive bracket screws 1 from each side of the hard drive. b. Lift the bracket 2 straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. Maintenance and Service Guide 4-9
Removal and replacement procedures
Maintenance and Service Guide
4–9
4. Loosen the Phillips PM2.5×10.0 captive screw
1
that secures the hard drive to the computer.
5. Grasp the Mylar tab
2
on the hard drive and slide the hard drive
3
away from the hard drive connector.
6. Remove the hard drive
4
from the hard drive bay.
7. If it is necessary to replace the hard drive bracket
a.
Remove the two Phillips PM3.0×3.0 hard drive bracket screws
1
from each side of the hard drive.
b.
Lift the bracket
2
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.