Compaq Presario CQ35-100 Compaq Presario CQ35 Notebook PC - Maintenance and Se - Page 45
from each side of the hard drive., Remove the two Phillips PM3.0×4.0 screws
View all Compaq Presario CQ35-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removal and replacement procedures 5. Remove the 2 hard drive spacers 1 that secure the hard drive in the hard drive bay. 6. Grasp the Mylar tab 2 on the hard drive and slide the hard drive 3 to the right. 7. Remove the hard drive 4 from the hard drive bay. 8. If it is necessary to replace the hard drive bracket, follow these steps: a. Remove the two Phillips PM3.0×4.0 screws 1 from each side of the hard drive. b. Lift the bracket 2 straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. Maintenance and Service Guide 4-9
Removal and replacement procedures
Maintenance and Service Guide
4–9
5. Remove the 2 hard drive spacers
1
that secure the hard drive in the hard drive bay.
6. Grasp the Mylar tab
2
on the hard drive and slide the hard drive
3
to the right.
7. Remove the hard drive
4
from the hard drive bay.
8. If it is necessary to replace the hard drive bracket, follow these steps:
a.
Remove the two Phillips PM3.0×4.0 screws
1
from each side of the hard drive.
b.
Lift the bracket
2
straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.