Compaq Presario CQ45-200 Compaq Presario CQ45 Notebook PC - Maintenance and Se - Page 53

lift the hard drive up and out of the computer, to slide the hard drive

Get Compaq Presario CQ45-200 - Notebook PC PDF manuals and user guides View all Compaq Presario CQ45-200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

3. Lift the left side of the hard drive cover (2), swing it to right, and remove the cover (3). The hard drive cover is included in the Plastics Kit, spare part number 486862-001. 4. Remove the three Phillips PM2.0×4.0 screws (1) that secure the hard drive to the computer. 5. Use the Mylar tab (2) to slide the hard drive (3) until it disconnects from the connector, and then lift the hard drive up and out of the computer (4). 6. If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws (1) that secure the hard drive bracket to the hard drive. Component replacement procedures 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
3.
Lift the left side of the hard drive cover
(2)
, swing it to right, and remove the cover
(3)
. The hard
drive cover is included in the Plastics Kit, spare part number 486862-001.
4.
Remove the three Phillips PM2.0×4.0 screws
(1)
that secure the hard drive to the computer.
5.
Use the Mylar tab
(2)
to slide the hard drive
(3)
until it disconnects from the connector, and then
lift the hard drive up and out of the computer
(4)
.
6.
If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0
screws
(1)
that secure the hard drive bracket to the hard drive.
Component replacement procedures
45