Compaq Presario CQ62-300 Compaq Presario CQ62 Notebook PC and HP G62 Notebook - Page 67
Power button board, Remove the wireless module see
View all Compaq Presario CQ62-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Power button board Removal and replacement procedures Description Power button board Spare part number 595204-001 Before removing the power button board: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Remove the hard drive (see "Hard drive" on page 4-8). 6. Remove the memory module (see "Memory module" on page 4-10). 7. Remove the wireless module (see "Wireless module" on page 4-12). 8. Remove the optical drive (see "Optical drive" on page 4-14). 9. Remove the keyboard (see "Keyboard" on page 4-17). 10. Remove the top cover (see "Top cover" on page 4-20). Remove the power button board: 1. Remove the Phillips PM2.0×3.0 screw 1 that secures the power button board to the top cover. 2. Lift up and remove the power button board 2. Reverse this procedure to install the power button board. Maintenance and Service Guide 4-23