Compaq Presario SA4000 Getting Started Guide - Page 28
Connecting a Multi-Channel Speaker System, to Your PC
View all Compaq Presario SA4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Connecting a Multi-Channel Speaker System to Your PC Multi-channel audio speakers plug into the Audio In, Audio Out, and Mic connectors on the back or front of the PC. Refer to the quick setup poster for the location of the connectors. 1 Turn off the PC and the speakers. 2 Connect the three audio cable plugs from the speaker system to the connectors on the back of the PC. (See the following table.) 3 Turn on the PC. 4 Turn on the speaker system. Connect speaker plugs for: 2 Speaker Mode 4/4.1 Speaker Mode Front speakers Front speakers 6/5.1 Speaker Mode Front speakers To PC connector Audio Out (lime-green) Connector icon OUT Not used for Rear speakers Rear speakers Audio In (blue) speakers IN Not used for speakers Not used for speakers Center/ subwoofer speakers Mic-1 (pink) Configure the audio output for the multi-channel speaker system by performing the following procedure. Configuring the Multi-Channel Sound Manager 1 Click Start on the taskbar. 2 Choose All Programs. 3 Choose Music. 4 Click Multi-channel Sound Manager. The Multi-channel Audio Configuration window opens. NOTE: If you do not see the Speaker Configuration tab, your PC does not have the multi-channel capability. However, it still has two-channel (stereo) output. 5 Click the Speaker Configuration tab. 6 Select the option describing the number of speakers in your system, for example, 6/5.1 speaker mode. You can click the Speaker Test tab and then click a speaker icon to test it. 7 Click OK. 22 Getting Started Guide