Compaq Presario SR5000 Start Here Guide - Page 42
Connecting Speakers Using the Creative Sound Blaster X-Fi Sound Card, Connecting the speakers
View all Compaq Presario SR5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Connecting Speakers Using the Creative Sound Blaster X-Fi Sound Card This section provides an overview of connecting to the Creative Sound Blaster X-Fi sound card. NOTE: For additional information on connecting the speakers, refer to the documentation that came with your speakers. Connecting the speakers Connector Description AD-Link for AD_Link X-Fi I/O Console (the X-Fi console is sold separately) 36 Start Here Line Out_3 (orange or yellow) 5.1 audio setup: Front center, subwoofer 6.1 audio setup: Front center, subwoofer, and rear center 7.1 audio setup: Front center, subwoofer, and side left Line Out_2 (black) 4.1, 5.1, 6.1 audio setup: Rear left and right 7.1 audio setup: Rear left, rear right, and side right Line Out_1 (lime green) 2/2.1 audio setup: Front left and right FlexiJack (white) for Line In, Microphone, Digital In/Out The FlexiJack supports three functions. You must select the function in the Creative Console Launcher. See "Connecting the FlexiJack connector." To connect the X-Fi sound card to your speakers: 1 Use the audio connection table to connect your audio system to the sound card. 2 Turn on the computer. 3 Plug in and turn on the speaker system power. After connecting the speaker system to the sound card, follow the steps in "Connecting the FlexiJack connector" to configure the speaker settings in the Creative Sound Blaster X-Fi software.