Compaq ProLiant 1200 Compaq Tips and Tricks for NetWare 5 - Page 15
Nwpa \naload, Reset Server, Server -nd
View all Compaq ProLiant 1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Compaq Tips and Tricks for NetWare 5 15 1. Start ServerMagic on Windows NT. 2. Select the drive. 3. Resize (reduce) the first partition by 20 to 30 megabytes. 4. Move the partition right leaving free space on the drive at the beginning. 5. Click the Apply button. (The server will reboot and run ServerMagic in boot mode.) 6. After ServerMagic appears, insert the Compaq Smart Start CD-ROM and proceed with the System Configuration Utility to add the Compaq System Partition. That's it! You no longer need to completely re-install and rebuild the drive just because someone deleted or never created the Compaq System Partition. A few more important installation tips. • To prevent the NetWare Peripheral Architecture (NWPA) from autoloading drivers, use the NWPA \NALOAD command in the STARTUP.NCF file. Without autoload, the system will load only the custom device modules (CDMs) that are manually loaded in the STARTUP.NCF file. By manually loading CDMs, you can be certain that a specific value-add feature provided by the manufacturer is available. If you don't disable autoload, NetWare 5 will merrily chug along and load the default CDMs for all devices detected by NWPA as well as those CDMs that are manually loaded. • Some issues, however, have been found with devices where only the manufacturer provided CDMs should have been used, but other default CDMs had been loaded. Specifically, when using a SCSI tape drive to make a backup, you should use the CDM that is recommended by the backup application manufacturer. • To bring up your server, use either the RESET SERVER or the RESTART SERVER commands. Remember that in NetWare 5, you don't need the DOWN command: • RESET SERVER warm boots your system. • SERVER -ND starts the server without loading NDS. Also see "Using Novell Directory Services with NetWare 5." • SERVER -NA starts the server without executing AUTOEXEC.NCF. • SERVER -NS starts the server without executing STARTUP.NCF. Generally, this command also stops the execution of the AUTOEXEC.NCF since SYS: is not mounted. Note: However, if there is an AUTOEXEC.NCF in the C:\NWSERVER directory when you use the SERVER -NS command, AUTOEXEC.NCF will execute. • RESTART SERVER brings the server down and then backup by unloading, then reloading NetWare 5. So, RESTART SERVER doesn't actually reboot your entire system-just the operating system. This is great if you've made any changes to the AUTOEXEC.NCF and STARTUP.NCF files. Besides, it's faster than RESET SERVER. • To shut down your server and not reload NetWare 5, use the DOWN command in place of the old DOWN and EXIT combination. And rest easy, events that have been keyed to EXIT will still function with the DOWN command since DOWN alone now triggers the EXIT events. 118R-1099A-WWEN