Compaq ProLiant 1600 Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenanc - Page 158
SW1 - System Maintenance Switch, Table 4-9
View all Compaq ProLiant 1600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
4-9 SW1 - System Maintenance Switch The following table defines the function for each SW1 switch setting on the Compaq ProLiant 1600 and ProLiant 1200 system I/O board. The default positions are indicated below. See Figure 4-5 and Table 4-7 for the location of the switch. Table 4-9 SW1 - System Maintenance Switch Settings Switch Function 1 Disable On-Board Video 2 Lock configuration information 3 Tower-to-Rack Conversion 4 Disable Diskette Boot 5 Disable Password 6 Clear NVRAM ON OFF On-board video is disabled. Default You cannot change configuration information. Converts the unit to a rack configuration. System booting from the diskette drive is disabled. Clears passwords. Clears NVRAM. Default Default (Tower model) Default Default Default Compaq ProLiant 1600 and ProLiant 1200 Servers Maintenance and Service Guide