Compaq ProLiant 4000 SMART-2DH Array Controller Reference Guide - Page 168
with the new Compaq Array Configuration Utility. Save the, configuration and reboot the server.
View all Compaq ProLiant 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
F-5 8. Turn on the server and run the Compaq System Configuration Utility (Version 2.35B or later). It can be run from the SmartStart and Support Software CD, from the System Partition, or from diskettes. This configuration utility will recognize the SMART-2DH Controller and allow you to change parameters such as controller order and interrupt number, if desired. You will not see logical drive information with this utility since SMART-2DH Controller logical drives are configured with the new Compaq Array Configuration Utility. Save the configuration and reboot the server. If you would like, you can run the Array Configuration Utility to see the configuration of your logical drive(s), look at fault tolerance level, and so on. However, this is not necessary since your configuration information is automatically preserved. After completing these steps, the upgrade process is complete; you can take full advantage of the SMART-2DH Array Controller. SMART-2DH Array Controller Reference Guide Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: M-APPF.DOC Last Saved On: 2/27/98 12:08 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED