Compaq ProLiant 5000 SMART-2DH Array Controller Reference Guide - Page 34
When Option ROMPaq is finished reprogramming the SMART-2DH, reprogrammed. DO NOT INTERRUPT.
View all Compaq ProLiant 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
3-6 Updating the Firmware 6. Review the information on the Caution screen: Device to reprogram: Current ROM revision: Selected ROM revision: ALL COMPAQ SMART-2DH Controller(s) COMPAQ SMART-2DH Controller x.xx COMPAQ SMART-2DH Controller y.yy Press Enter to reprogram the SMART-2DH Controller ROM or Esc to discontinue the reprogramming and return to the Select An Image screen. 7. Reprogramming Firmware indicates that the SMART-2DH Controller ROM is being reprogrammed. DO NOT INTERRUPT. CAUTION: Do not interrupt this cycle. Interrupting the ROM reprogramming will leave the firmware in an unknown state. If this happens you may not be able to reprogram the ROM and the SMART-2DH Controller ROM may have to be replaced. You will be notified that reprogramming is completed. 8. When Option ROMPaq is finished reprogramming the SMART-2DH Controller ROM, press Enter if you wish to reprogram another Compaq option. Repeat steps 4 - 7. 9. If you are finished with reprogramming options, press Esc to exit the ROMPaq Utility. 10. Remove the Option ROMPaq diskette and reboot the server by cycling the power (cold boot). To upgrade additional options in the server, repeat steps 2 - 9 by booting from each Option ROMPaq diskette in succession. The SMART-2DH Controller ROM has been updated; you can take advantage of the new or increased capabilities, if any, available with the new firmware. Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: D-CH03.DOC Last Saved On: 2/27/98 11:26 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED