Compaq ProLiant 6000 SMART-2DH Array Controller Reference Guide - Page 189
What must I do with System ROMPaq?, Compaq ProLiant Storage System to either port.
View all Compaq ProLiant 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
I-3 Q. I ordered my server with a pre-installed SMART-2DH Controller. Will the server ship with the SCSI cable that I will need to connect to my Compaq ProLiant Storage System? A. No, you will not receive the external SCSI cable with your server. However, the required cable is supplied with Compaq ProLiant Storage systems. Q. I do not have any hard drives in my server, but I am connecting it to a Compaq ProLiant Storage System which has several hard drives. Which SCSI port do I use? A. If you have no hard drives installed in your server, you can connect the Compaq ProLiant Storage System to either port. CAUTION: Do not interchange these connectors after you configure your SMART-2DH Controller. Interchanging the connectors could result in a loss of your data. If you have hard drives installed in your server and connected to the SMART-2DH Controller, only one port (2) will be available externally. Q. I want to connect two Compaq ProLiant Storage Systems to my server. Can I also connect the internal hard drives in my server to the SMART-2 DH Controller? A. No; if you connect two ProLiant Storage Systems to your server you cannot connect any internal hard drives in your server to your SMART-2DH Controller because both SCSI ports will be used externally. You can add an additional SMART-2DH Controller to your server to control any internal drives. Q. What must I do with System ROMPaq? SMART-2DH Array Controller Reference Guide Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: P-APPI.DOC Last Saved On: 2/27/98 12:13 PM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED