Compaq ProLiant 6400R Compaq ProLiant 6400R Setup and Installation Guide - Page 16
Expansion Slots, PCI Hot-Plug, System Fans - cpu fan
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Server Features 1-3 Expansion Slots There are six total I/O expansion slots. Five 64-bit PCI Hot Plug slots: Pre-installed Compaq NC Fast Ethernet Dual 10/100 Network Interface Controller (upgradeable to a gigabyte) Four available slots One shared 64-bit PCI/ISA slot is available. NOTE: The ISA slot is for modem use only. PCI Hot Plug PCI Hot Plug provides the ability to remove and replace, upgrade, and add PCI expansion boards without powering down the server. Any PCI board can be placed in a PCI Hot Plug slot. PCI Hot Plug device drivers and operating system support, however, are required in order to enable the PCI Hot Plug. A next-generation PCI Hot Plug button allows PCI Hot Plug access directly at each PCI slot, providing PCI Hot Plug control directly at the server without requiring, but still compatible with, the PCI Hot Plug utility software. For more information about the PCI Hot Plug, see the Documentation CD and the Systems Reference CD, included in the Reference Information pack. System Fans The Compaq ProLiant 6400R server includes hot-plug, redundant fans that provide high-level thermal protection throughout your entire system. All fans run at all times. The system can cool with only two CPU fans running. Hotplug redundant fans protect the server from overheating and possible system interruption. A failed fan generates a system alert. The system prompts you to replace the failed fan and enables the hot-plug secondary or redundant CPU fan to take over automatically.