Compaq ProLiant 800 SMART-2DH Array Controller Reference Guide - Page 37
Place the Compaq SmartStart and Support Software CD in the server
View all Compaq ProLiant 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4-3 Running the System Configuration Utility To run the System Configuration Utility: 1. Place the Compaq SmartStart and Support Software CD in the server CD-ROM drive. or Place the System Configuration Utility diskette 1 in the server floppy drive. 2. Reboot the server. 3. During the boot process, several messages are displayed. Among these will be a notice that one or more SMART-2DH Controllers were detected in option slots, and a recommendation to run the System Configuration Utility. 4. If prompted, press F1 to resume booting. 5. If you are using the Compaq SmartStart and Support Software CD, select Run the System Configuration Utility from the main menu screen. 6. If you are given a choice of Auto Configuration, choose Yes. 7. The system loads configuration files for all detected devices. 8. In the Configuration Complete screen, be sure to choose Review or modify hardware settings. 9. From the next screen, Steps In Configuring Your Computer, select Step 3: View or edit details. 10. The View Or Edit Details screen is where you will set the SMART2DH Controller(s) configuration parameters. Scroll down to the option slot for the first SMART-2DH Controller and edit each parameter according to the following information. SMART-2DH Array Controller Reference Guide Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002 File Name: E-CH04.DOC Last Saved On: 2/27/98 11:28 AM COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED