Compaq ProLiant 8500 ProLiant 8500 Server Technology - Page 15
Redundant Hot-Plug Power Supplies, Self-test., Auto Line Sensing., LED Standby Controls.
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
TC000604TB TECHNOLOGY BRIEF (cont.) ... Redundant Hot-Plug Power Supplies The ProLiant 8500 server uses one of the newest Compaq technologies to reduce downtime: intelligent, redundant, hot-plug power supplies. The server supports two dual-rated 1150-watt/500-watt power supplies with new handles for easier insertion and removal. Even if one of these power supplies fails, its internal fans will continue to operate and help cool the server. A single power supply running at 220 volts can support a fully loaded ProLiant 8500 server, but a second power supply adds redundancy and fault tolerance. The power supplies have an embedded microcontroller and an inter-integrated circuit bus that communicates the status back to the system health drivers.2 The health drivers then send status information to the IMD and to Compaq Insight Manager. The microcontroller performs the following functions: • Self-test. The intelligent power supplies perform their own power-on self-test (POST) that checks temperature, RAM integrity, ROM version, analog-to-digital conversion accuracy, and nonvolatile memory integrity of the power supply. • Auto Line Sensing. Because the power supplies are rated for both 1150 watts (at 220 volts) and 500 watts (at 110 volts), a line-sensing feature automatically recognizes which line voltage is connected. The customer does not need to configure the supply for voltage. • LED Standby Controls. The microcontroller also drives two status light-emitting diodes (LEDs) on the back of the power supply that indicate power status, as shown in Figure 9. This gives the user vital status information at a glance. Clear - Front panel power switch off or open interlock Flashing Green - Power on delay or software power off Green - Outputs on and good Flashing Amber - Failed self test Amber - Outputs failed Flashing Amber/Green - Restart failed Green - AC power good Clear - AC power not good Figure 9: Power supply LED status indicators. 2 For additional details about Compaq's intelligent power supplies, see the technology brief Intelligent Power Supply Technology, document number ECG016/0198. 15