Compaq ProLiant 8500 Integrating Microsoft Windows Server 2003 R2 on HP ProLia - Page 8
Supported software, hardware. For ProLiant servers without an IPMI BMC device - server firmware
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
NOTE At this time, WS-Management Out of Band in iLO 2 is not supported on HP ProLiant 300 and 500 Series Servers. Future firmware versions may support this feature. Supported software Table 4 lists supported ProLiant utilities, drivers, and other value-add software and their corresponding version needed for Windows Server 2003 R2. Table 4. Supported ProLiant value-add software Utility Minimum version Location ProLiant Support Pack (PSP) for 7.50 Microsoft Windows Server 20033 http://h18023.www1.hp.com/support/files/serve r/us/locate/3376.html System Configuration Utility 2.58 http://h18023.www1.hp.com/support/files/serve r/us/locate/1950.html Note 3: For IPMI and WS-Management to work correctly on systems using the HP ProLiant Advanced or Advanced and Enhanced System Management Controller Driver, the HP IPMI Provider, which is included in PSP 7.50 (or later), must be installed. The ProLiant 100 Series Servers and some newer systems that use the HP ProLiant iLO2 Management Controller Driver do not need this provider because they have the necessary IPMI hardware. For ProLiant servers without an IPMI BMC device, the HP IPMI Provider emulates the Microsoft IPMI Provider by collecting IPMI data from the HP System Management Controller Driver and making it available through the "root\hardware" WMI namespace. 8