Compaq ProLiant CL380 Compaq ProLiant CL380 User Guide - Page 224
Appendix H: SCSI ID Configurations, Introduction
![]() |
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
H Appendix SCSI ID Configurations Introduction The ProLiant CL380 supports various configurations of SCSI ID, Host I/O Channel Target ID, and Host Port numbers. In some cases, this can be confusing, as the relationship between these is not always clear. These can be configured in a variety of ways, including from the System Configuration Utility and the CR3500 Configuration Utility. This document will describe the configuration of the following components: SCSI ID numbering for the Compaq 64-Bit Dual Channel Wide Ultra2 SCSI Controller in each server node Host I/O Channel Target IDs for CR3500 Controllers Host Port numbering for CR3500 Controllers and Logical Drives SCSI ID numbering for disk drives
![](/manual_guide/products/compaq-cl380-compaq-proliant-cl380-user-guide-d888a57/224.png)
Appendix
H
SCSI ID Configurations
Introduction
The ProLiant CL380 supports various configurations of SCSI ID, Host I/O
Channel Target ID, and Host Port numbers. In some cases, this can be
confusing, as the relationship between these is not always clear. These can be
configured in a variety of ways, including from the System Configuration
Utility and the CR3500 Configuration Utility.
This document will describe the configuration of the following components:
■
SCSI ID numbering for the Compaq 64-Bit Dual Channel Wide Ultra2
SCSI Controller in each server node
■
Host I/O Channel Target IDs for CR3500 Controllers
■
Host Port numbering for CR3500 Controllers and Logical Drives
■
SCSI ID numbering for disk drives