Compaq ProLiant CL380 Implementing Microsoft Windows Server 2003 with Service - Page 34
The Smart Array 4200 Controller Driver does not install during Setup.
View all Compaq ProLiant CL380 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Issue 6 Issue 7 Issue 8 The Smart Array 4200 Controller Driver does not install during Setup. Description During installation of Windows Server 2003, a popup box reports the following: Setup had problems installing the following device: Compaq Smart Array 4200 Controller. Do you want to delay installing this device until after setup is complete? The Smart Array 4200 Controller will not be installed during Windows Server 2003 Setup if this controller is set as the boot controller. Solution This issue is resolved by installing Windows Server 2003 SP2. Incorrect port number and port ID returned in insertion and removal events. Description When using Smart Array 5xxx Notification Driver (CPQCISSE.SYS) Version 5.42.0.32 with Smart Array Cluster Storage, the port number and port ID in removal and insertion events are reported incorrectly. Solution To resolve this issue, upgrade to Smart Array Cluster Controller Firmware Version 1.70 (or later) and upgrade to Version 5.42.2.32 (or later) of the CPQCISSE.SYS driver. Smart Array Cluster Controller Firmware Version 1.70 (or later) is downloadable as follows: • Name: Online ROM Flash Component for Windows Compaq Smart Array Cluster Storage Controller • Download location: www.hp.com/cgibin/hpsupport/index.pl CPQCISSE.SYS Version 5.42.2.32 (or later) is downloadable as follows: • Name: ProLiant Smart Array 5x and 6x Controller Driver for Windows 2000/Server 2003 • Download location: www.hp.com/cgibin/hpsupport/index.pl Embedded network interface controllers are not enumerated consistently. Description After installing and configuring embedded network interface controllers (NICs) post Windows Server 2003 installation, the port configurations may not operate as expected. For additional details, refer to the customer advisory posted at http://h20000.www2.hp.com/bizsupport/TechSupport/D ocument.jsp?lang=en&cc=us&objectID=c00712319. Solution The above advisory provides instructions on renaming the ports in the Network Connections panel. If you are experiencing this situation, follow the instructions in the advisory or switch cables. 34